IVD660H-FM · up to 3,000 sq ft
InterVac Pro Flush Mount
The first new way to install a central vacuum in over 50 years: recessed into a 2x4 stud wall, less than 4 in. showing.
- Ordered and shipped by InterVac Design Corp, Palm City, Florida
- Free standard shipping over $199 in the continental US
- 2-year warranty on vacuum units
- Klarna and Afterpay available at checkout
At checkout on intervacdesign.com this appears as InterVac Pro (formerly CondoVac and IVD660), option “Flush Mount Package (Vacuum + Mounting Frame)”. Same unit, same warranty.
A first in over 50 years
The central vacuum finally goes inside the wall.
For more than 50 years, a central vacuum has meant a big canister hanging in the garage or basement. The InterVac Pro is the first real change to how a central vacuum installs in all that time.
It can recess into a standard 2x4 stud wall: 3 7/8 in. of the unit sits inside the wall, leaving less than 4 in. in the room. There's no bulky canister taking up floor or wall space, so the Pro can go in a hall closet, mudroom or finished basement and keep the room looking clean.
Recessing is an option, not a requirement. The Pro also ships with a bracket to hang on the wall surface, at under 8 in. deep.
About the Pro Flush Mount
Same 660-air-watt InterVac Pro, installed flush. The optional mounting frame sets the unit into a standard 2x4 stud wall so less than 4 inches shows in the room: 3 7/8 in. of the unit sits inside the wall. It's the clean look for a finished basement, mudroom or hallway closet.
What's in the box
- InterVac Pro power unit
- Mounting frame for recessed install (added to your order)
- Wall-mounting bracket
- 6 ft power cord
- One Y20 dust bag
- One motor filter
- One exhaust filter
Full instructions: owner's manual M-13-E. Listed on intervacdesign.com as InterVac Pro, Flush Mount Package (IVD660H-FM).
Specifications
| Suction power | 660 air watts |
|---|---|
| Water lift | 134 in. sealed / 86 in. working |
| Airflow | 121 CFM max / 42 CFM working |
| Input | 1,526 W, 15.2 A at 60 Hz |
| Bag | 2 gal (7.5 L), HEPA-type filtration |
| Coverage | Homes up to 3,000 sq ft |
| In-wall depth | 3 7/8 in. (fits a 2x4 stud wall) |
| Showing in the room | Less than 4 in. |
| Weight | 14 lb |
| Certifications | UL, CE, UKCA |
| Warranty | 2 years |
Keep it running
Genuine bags and filters
Add a VacPort
Put a sweep inlet in the kitchen.
The Pro Flush Mount is a piped system, so it works with a VacPort. The A-950-X kit has the VacPort, trim and every fitting for one install.
