Central Vacuum USAby InterVac

IVD660H · up to 3,000 sq ft

InterVac Pro Surface Mount

Our most powerful home vacuum. Hang it on the wall, or recess it into the wall with the flush-mount package.

InterVac Pro, surface mount$453.22Ships with the wall bracketBuy now
  • Ordered and shipped by InterVac Design Corp, Palm City, Florida
  • Free standard shipping over $199 in the continental US
  • 2-year warranty on vacuum units
  • Klarna and Afterpay available at checkout

At checkout on intervacdesign.com this appears as InterVac Pro (formerly CondoVac and IVD660), option “Home Vacuum”. Same unit, same warranty.

A first in over 50 years

The central vacuum finally goes inside the wall.

For more than 50 years, a central vacuum has meant a big canister hanging in the garage or basement. The InterVac Pro is the first real change to how a central vacuum installs in all that time.

It can recess into a standard 2x4 stud wall: 3 7/8 in. of the unit sits inside the wall, leaving less than 4 in. in the room. There's no bulky canister taking up floor or wall space, so the Pro can go in a hall closet, mudroom or finished basement and keep the room looking clean.

Recessing is an option, not a requirement. The Pro also ships with a bracket to hang on the wall surface, at under 8 in. deep.

Traditional canister versus InterVac Pro recessed in the wall Side view of a wall. On the left, a traditional central vacuum canister hangs off the wall and sticks well out into the room. On the right, the InterVac Pro sits half inside a 2x4 stud wall: 3 7/8 inches in the wall and less than 4 inches showing in the room. Traditional canister InterVac Pro, recessed sticks well out into the room IN THE WALL 3 7/8 in. in the wall under 4 in. in the room about half sits inside the wall

About the Pro Surface Mount

The InterVac Pro is the whole-house unit. 660 air watts, a 2-gallon bag and HEPA-type filtration, rated for homes up to 3,000 sq ft. The surface-mount install uses the bracket that ships in the box: the unit hangs on the face of a garage, basement or utility-room wall with an overall depth under 8 inches.

Piped system. The power unit sits out of sight and connects through 2 in. tubing to inlet valves and VacPorts around the house. It uses the full fittings range.

What's in the box

  • InterVac Pro power unit
  • Wall-mounting bracket
  • 6 ft power cord
  • One Y20 dust bag
  • One motor filter
  • One exhaust filter

Full instructions: owner's manual M-13-E. Listed on intervacdesign.com as InterVac Pro (IVD660H), formerly sold as the CondoVac®.

Specifications

Suction power660 air watts
Water lift134 in. sealed / 86 in. working
Airflow121 CFM max / 42 CFM working
Input1,526 W, 15.2 A at 60 Hz
Bag2 gal (7.5 L), HEPA-type filtration
CoverageHomes up to 3,000 sq ft
Size19 7/16 in. H x 10 1/2 in. W x 7 5/8 in. D
Surface-mount depthUnder 8 in. overall
Weight14 lb
CertificationsUL, CE, UKCA
Warranty2 years

Keep it running

Genuine bags and filters

All bags and filters
Y20-3 dust bags
Y20-33 bags plus a motor filter and an exhaust filterFits InterVac Pro (surface and flush), CondoVac®, IVD660
$24.36Buy
Y25 motor filter
Y25Motor filterFits InterVac Pro, CondoVac®
$6.76Buy
Y50 exhaust filter
Y50Exhaust filterFits InterVac Pro, CondoVac®
$4.86Buy

Add a VacPort

Put a sweep inlet in the kitchen.

The Pro Surface Mount is a piped system, so it works with a VacPort. The A-950-X kit has the VacPort, trim and every fitting for one install.

VacPort complete install kit A-950-X